2006 FLEXIBLE DISPLAYS & MICROELECTRONICS CONFERENCE
AGENDA |
| Tuesday, February 7, 2006 |
| |
7:15 am |
|
Registration & Continental Breakfast |
| Session 1- Business & Market Perspectives |
| |
8:00 am |
|
Welcome & Overview of the Conference
Dr. M. Robert Pinnel, USDC |
| Keynotes |
| |
8:15 am |
|
1.1 Overview of Flexbible Displays - Applications Roadmap
Karl McGoldrick, Polymer Vision |
| |
8:45 am |
|
1.2 Ubiquitous Flexible Electronics
Beng Ong, Xerox Research Center |
| |
9:15 am |
|
1.3 Beyond Performance: The Real Challenges for OTFT
Tom Mclean, Merck LCD |
| |
9:45 am |
|
Break & Exhibits Open |
| Session 2 - Products & Display Technologies |
| |
10:10 am |
|
2.1 Overview: Markets & Applications Trends
Liz Ziepniewski, I.T. Strategies |
| |
10:35 am |
|
2.2 Advances in Microencapsulated Electrophoretic Displays
Dr. Michael McCreary, E Ink Corporation |
| |
11:00 am |
|
2.3 Flexible Microelectronics; SUFTLA Thin Film Displays
Dr. Mitsutoshi Miyasaka, Seiko Epson Corp. |
| |
11:25 am |
|
2.4 Full Color Top Emission AMOLED Displays on Flexible Metal Foil
Dr. Anna Chwang, Universal Display Corporation |
| |
11:50 am |
|
2.5 Coated and Transferred Flexible Bistable Cholesteric Displays
Dr. Asad Khan, Kent Displays |
| |
12:15 pm |
|
Open Forum Session 2 |
| |
12:30 pm |
|
Lunch & Exhibits/Poster Session Open |
| Session 3 - Products & Display Technologies - New Innovations |
| |
1:45 pm |
|
3.1 Drying-Assisted Self-Assembly Method for Flexible Cholesteric LCD - A Path to High Performance Electronic Paper
Krishnan Chari, Kodak |
| |
2:10 pm |
|
3.2 Electronic Ink for Flexible Electronic Paper
Dr. Remy Cromer, Zikon Corporation |
| |
2:35 pm |
|
3.3 A Low Cost, Applications-Focused Approach to Flexible Emissive Displays
Dr. J. Devin MacKenzie, Add-Vision |
| |
3:00 pm |
|
3.4 Flexible Organic and Inorganic Display Devices Based on Vacuum Deposited Polymer Materials
Dr. Angelo Yializis, Sigma Technologies, Int'l |
| |
3:25 pm |
|
Open Forum Session 3 |
| |
3:45 pm |
|
Break & Exhibits/Poster Session Open |
| Up to top |
| Session 4 - Flexible Backplane Technologies |
| |
4:15 pm |
|
4.1 Electrophoretic Displays Made by the EPLaRtm Process
Dr. Ian French, Philips Research Laboratories |
| |
4:40 pm |
|
4.2 Comparison of TFT Processes on Plastic and Steel Foil
Dr. Robert Street, PARC |
| |
5:05 pm |
|
4.3 High performance Poly-Si TFT (μ>290cm2/ Vsec) Direct Fabricated on Transparent Plastic Substratre below 170°C
Jang Yeon Kwon, Samsung Advanced Institute of Technology |
| |
5:30 pm |
|
4.4 Electrical Characteristics of a-Si TFT Fabricated on PEN Plastic Substrate Under Mechanical Stress
Te-Chi Wong, ERSO/ITRI |
| |
6:15 pm |
|
Event Reception |
| Wednesday, February 8, 2006 |
| |
7:30 am |
|
Registration & Continental Breakfast |
| Up to top |
| Session 5 - TFT Technology on Flexible Backplanes |
| |
8:00 am |
|
5.1 Electrical Properties of Pentacene Based Organic Thin-Film Transistor (OTFT) on Flexible Substrate
Yi-Kai Wang, ERSO/ITRI |
| |
8:25 am |
|
5.2 CMOS-on-Plastic TFTs and Circuits Using Sequential Laterally Solidified Silicon
Dr. Michael Kane, Sarnoff Corporation |
| |
8:50 am |
|
5.3 Printed Polymer-Based TFTs for Flexible Display Backplanes
Ana Claudia Arias, PARC |
| |
9:15 am |
|
5.4 High Temperature α-Si TFTs Fabricated on CP
Prof. James C. Sturm, Princeton/DuPont |
| |
9:40 am |
|
Open Forum Session 5 |
| |
10:00 am |
|
Break & Exhibits/Poster Session Open |
| Up to top |
| Session 6 - Materials for Flex: Barrier Technology |
| |
10:30 am |
|
6.1 PCLC Flake/Fluid Host Electro-Optical Suspensions: Progress Toward Flexible Reflective Displays
Dr. Kenneth Marshall, Univ. of Rochester |
| |
10:55 am |
|
6.2 Progress Toward Early-to-Market Flexible OLEDs: Packaging of Low-Resolution Plastic and High-Resolution Foil-based Displays
Teresa Ramos, Vitex Systems |
| |
11:20 am |
|
6.3 Progress in the Development of SiC:H Alloy Films on Flexible Substrates for Extremely Low Moisture Permeability Applications
Vasgen Shamamian, Dow Corning Corporation |
| |
11:45 am |
|
6.4 Barrier Engineering: Developing a Manufacturing Worth, Single 250nm Thick Layer, Process for Flexbile Display and Microelectronics
Brian Stickney, Symmorphix |
| |
12:10 pm |
|
Open Forum Session 6 |
| |
12:30 pm |
|
Lunch & Exhibits/Poster Session Open |
| Up to top |
| Session 7 - Materials for Flex: Substrates & Layer Systems |
| |
1:45 pm |
|
7.1 Progress on Flexible Substrates for Organic Electronics
Dr. Min Yan, General Electric |
| |
2:10 pm |
|
7.2 Latest Development in Polyester Film for Flexible Electronics
Dr. Bill A. MacDonald, DuPont Teijin Films |
| |
2:35 pm |
|
7.3 Stainless Steel Substrates for Flexible Displays and Electronics
Dr. Vincent Cannella, Energy Conversion Devices |
| |
3:00 pm |
|
Open Forum Session 7 |
| |
3:15 pm |
|
Break & Exhibits Open/Poster Session Open |
| Up to top |
| Session 8 - Materials for Flex: Other Coatings & Evaluations |
| |
3:45 pm |
|
8.1 Advances in Plexcoretm Material Technology for Organic Electronic Devices
Troy Hammond, Plextronics |
| |
4:10 pm |
|
8.2 Development of Novel Hole Injection System for Robust Polymer Light Emitting Diodes
Dr. Toshio Suzuki, Dow Corning Corporation |
| |
4:35 pm |
|
8.3 Simple Tools for Ink Jet Printing on Flexible Substrates
Dr. Linda Creagh, Dimatix, Inc. |
| |
5:00 pm |
|
Open Forum Session 8 |
| Thursday, February 9, 2006 |
| |
7:30 am |
|
Registration & Continental Breakfast |
| Up to top |
| Session 9 - Manufacturing on Flex: Consortia & Prototype Facilities |
| |
8:00 am |
|
9.1 FDC Initiative on Flexible Backplane Technologies
Shawn O'Rourke, Flexible Display Center at ASU |
| |
8:25 am |
|
9.2 "FlexiDis" Consortium Technology Projects
Dr. Eliav Haskal, Philips |
| |
8:50 am |
|
9.3 14" Prototype Line for Manufacturing Flexible Active Matrix Displays
Cathy Curling, Plastic Logic |
| |
9:15 am |
|
9.4 TruNanotm Processing for Flexible
Michael Lee, UTO International Corporation |
| |
10:00 am |
|
Break & Exhibits/Poster Session Open |
| Up to top |
| Session 10 - Manufacturing on Flex: Process Technologies & Materials |
| |
10:30 am |
|
10.1 Inks for Flexible Electronics Manufacturing: Comparing Printable Electronics to Conventional Processes
Dr. Karl Vanheusden, Cabot Corporation |
| |
10:55 am |
|
10.2 Island-Containing Thin Metal Interconnects on Polymer Substrates for Flexible Electronics Applications
Frederick Biga, Brown University |
| |
11:20 am |
|
10.3 Sheet Resistivity Modification of PEDOT-PSS by Inkjet Printing Mild Oxidant
Dr. Ghassan Jabbour, ASU/Flexible Display Ctr. |
| |
11:45 am |
|
10.4 Laser Direct Imaging: Multi-Purpose Tool in Manufacturing Displays & Printable Electronics
Eran Elizur
Kodaks Graphics Comm. Canada |
| |
12:10 pm |
|
Open Forum Session 10 |
| |
12:30 pm |
|
Lunch & Exhibits/Poster Session Open [Final] |
| Up to top |
| Session 11 - Manufacturing: Transition to R-2-R |
| |
1:30 pm |
|
11.1 Are We There Yet? Updates to the Roll-to-Roll Manufacturing Cost Model for Flexible Displays - 2005
Abbie Gregg, Abbie Gregg, Inc. |
| |
1:55 pm |
|
11.2 Overview - Center for Advanced Microelectronics Manufacturing (CAMM)
Dr. Bahgat Sammakia, Binghamton University |
| |
2:20 pm |
|
11.3 Towards Roll-to-Roll Manufacturing of Electronics on Flexible Substrates
Dr. Carl Taussig, Hewlett-Packard |
| |
2:45 pm |
|
11.4 Novel Roll-to-Roll Manufacturing Techniques for Patterning Conductive Layers
Robert Praino, MicroContinuum |
| |
3:10 pm |
|
Break |
| Up to top |
| Session 12 - Manufacturing: Equipment & Processes |
| |
3:25 pm |
|
12.1 Basic Pre-Tests on Roll-to-Roll Web Coaters for Flexible Displays
H.G. Lotz, Applied Films |
| |
3:50 pm |
|
12.2 Inkjet Fabrication of Multi-Color Microcup® Electrophoretic Display
Tianzong Xu, SiPix Imaging Corporation |
| |
4:15 pm |
|
12.3 AIMCAL, The Asociation of Industrial Metallizers, Coaters & Laminators - An Overview
TBD |
| |
4:40 pm |
|
Adjournment |
| |
Up to top |
|
|
